The band were booked again from their wesbite Apollo Live to entertain Mr and Mrs Moxham’s guests on their wedding day. The ceremony was situated in the beautiful gardens at Moxhull Hall. After all the guests had found their seats, bridesmaids started to enter. They were all dressed in long light pink dresses with flowers in their hair, next the bride entered, the song “All of me” by John Legend was playing as she gracefully walked down the aisle, once she was at the bottom of the isle she took the grooms hand and the service began.
As the ceremony was taking place the Apollo duo, Corey and James were setting up for the drinks reception. Corey and James were using an L1 Bose speaker system, this system works great in open areas as it has angled speakers that spread the sound to different locations, further to this the overall look of the system is very sleek and compact.
Once the ceremony was finished all the guests started to congregate in the courtyard were the Apollo soul duo started playing their music. While the guests were drinking and enjoying the sun, the bride and the groom had to go off with their photographer and get some shots around the venue. Corey and James were left to entertain guests with songs like, all night long “Lionel Richie”, Shape of you “Ed Sheeran” and Dance with me tonight “Olly Murs.
Once the drinks reception had finished everyone was asked to take their seats in the main room for the speeches. For the main meal they were serving, vegetable soup for starter, a pork joint and vegetables for main and a selection of mini cakes for desert.
After the speeches finished the rest of Apollo Soul arrived and were ready to set up the equipment for the evening. On this gig Apollo Soul has just added a new member to the band, Mr Seb Read on the bass guitar.
Once Apollo Soul were set up the bride and the groom had to cut their cake, they had a three tier Victoria sponge cake, everyone surrounded the bride and the groom to take pictures while they cut the cake and got ready for the first dance. For their first dance the bride and the groom chose “Your Song” by Elton John, which the band performed live. After the first dance was over Apollo Soul went straight into their set wowing the audience with hit after hit, keeping the dance floor full all the way through, at the end of the set the lead singer Corey got all the audience to sing the last line of Lionel Richie’s Easy and then the DJ took over for bridge the gap. When Apollo soul returned they continued to play until midnight, with the bride and the groom giving a final speech to bring the evening to a close.
When you want to replace the roof of your home then the most difficult decision is to decide the kind of roofing you are going to have. A healthy research into the types available would give you an idea about what you are looking for and what is available to you, making your decision easier to an extent. Hereby we will be having a look at the various aspects of steel roofing at phoenixsteels.com that is quite popular and in demand these days.
The major advantage of the corrugated steel roofs (mentioned afterward) is their lightweight. This makes their installation and portability extremely easy. Even the professionals find steel roofs easy to work with. Either on large high-rise buildings or in the smaller homes steel, mostly roofs are used. This is because these have the high strength to weight proportion.
Durability is another factor that should be considered while thinking of steel roofs. If you want a roof that would not break from the ends or develop cracks in its structure then steel roofing is the answer. The coating of the zinc and aluminum helps in increasing the durability of the steel roofs. The steels roofs are also very much energy efficient. Due to the highly reflective nature of the steel, these tend to have exceptional thermal capabilities that minimize the energy loss giving it the environment friendly status.
Along with these advantages, most concerns that the people raise are about the looks of the steel roofs. Indeed these concerns were valid sometime back but nowadays, steel roofing comes in various styles and models that will be good looking as compared to the old drab styles. Initially steel might be more expensive than other options but given its low maintenance and durability initial cost would not count much in the long run.
Advice on the best build in arcade machines UK
The place to buy or build your own arcade machine running hyperspin. Id like to share with you the website of arcade machine manufacturer Arcade Evolution.
First of all, going into the conversation, I was totally unfamiliar with what was included in the construction of a machine and, more importantly, what the machines can actually do these days. So as Arcade Evoltuion and I were talking I took out my notebook and jotted down some notes that I’d like to share as they may prove to be valuable to you.
Tip #1- When constructing the arcade machine, the first step comes in properly understanding what games you’re intending to play. First off, I wasn’t even aware that today’s arcade machines are capable of playing hundreds of games on the same machine. I was only concerned with Street Fighter 2: Turbo and, as Emily pointed out, I could play that and several other games on the same arcade machine. However, what powers today’s arcade machines that people are building are primarily Windows based PC’s. Games from PlayStation and before can usually be run on an old Pentium 2 with 64 Megs of RAM. Just about any game can be transferred to the PC but if you’re going to run recent games you’ll have to consider using higher level hardware components in the machine itself.
Tip #2- Start with a clean system. One of the first things they do when programming the arcade machine is to reformat the hard drive and install a fresh copy of Windows as the operating system. After this you’ll want to learn how to optimize Windows for maximum game play as these will be the only programs running on Windows in the arcade machine. Doing so will allow for a smoother operation for all game play. Partitioning the hard drive during the reformat process can also be beneficial.
Tip #3- Don’t fret over the controllers. One of the main reasons I never got started before was because I really didn’t understand the anatomy of the arcade machine. I assumed there would be so many wires that I wouldn’t know where in the world to start. Actually, it’s quite simple to just order a pre-constructed dual-joystick control for around £100. If actually creating the controls is your thing, then great. However, most people want to get the thing playing and looking decent. It’s just a lot easier to order the controls and then just install them with everything else.
Tip #4- Building the arcade cabinet is easier than you may think. This is kind of a natural lead in from the previous tip. With the proper dimensions and pieces outlined, you can often have these cuts done for you at the lumber store leaving only the framing to be put together which doesn’t require you to be an expert carpenter.
Dusting off some of my old computer equipment and putting it to use again in an arcade machine is definitely possible and, in fact, not as difficult as I thought. I hope sharing these tips will help you to better understand the how easy and affordable it can be to build your own arcade machine, especially when you have the right direction in doing so. In fact, at Arcade Evolution website they tell you how to build your own arcade machine.